⚠ 24/7 Emergency Mold Testing in Severance, CO — Call +1-844-578-1604 Now
AIHA-Method Air Sampling — Severance, CO

Mold Testing in Severance —
Accredited Lab, Chain of Custody

Consumer mold test kits generate results, not data. Our Severance, CO Mold Testing uses professionally calibrated air sampling pumps, NIOSH-recommended sampling methodology, and accredited laboratory analysis — producing spore counts, species identification, and indoor-to-outdoor baseline comparison that actually supports decision-making.

NIOSH
Sampling Method
Accredited
Lab Analysis
COC
Chain of Custody
Licensed Mold Testing service in Severance, CO - Cheap Mold Removal
01
🏫
Accredited Lab — Not In-House Analysis
Third-party accredited lab analysis on every Severance test. Independent credibility for insurance, real estate, and legal use.
02
📋
Documented Chain of Custody
Chain of custody documentation on every sample. Required for credibility in Severance, CO insurance and legal contexts.
03
📷
Calibrated Sampling Equipment
Professionally calibrated air sampling pumps, correct cassette flow rates, validated sampling duration — not consumer test kits. Our Severance sampling protocol follows AIHA-recommended methodology for defensible air quality results.
04
$
Flat-Rate Testing Fee — Full Scope
Full-scope flat rate: sampling, lab, report. Disclosed before we book your Severance, CO testing appointment.
Testing Methods — Severance, CO

Six Mold Testing Methods Available in Severance, CO

Each method below produces different data. We explain which is appropriate for your Severance, CO property situation before you commit.

Non-Viable
💨Spore Trap Air Sampling
The workhorse of mold air testing. Fast turnaround (24–48hr), genus-level ID, quantified indoor vs. outdoor comparison. Appropriate for most routine Severance residential and commercial testing scenarios.
Viable
🏭Viable Culture Air Sampling
When genus ID isn't enough, viable culture plates give species-level confirmation. Critical for Stachybotrys chartarum investigation and situations where CFU counts and exact species matter — typically health-concern investigations and some insurance scenarios in Severance, CO.
Surface
🎖Surface Swab & Tape Lift Sampling
Surface swab samples from visible growth areas are sent to an accredited lab for culture analysis or direct microscopy — confirming whether visible discoloration is mold and identifying the genus/species. Tape lifts provide a faster direct-microscopy option for surface assessment. Used when the presence of mold on a specific surface needs to be confirmed and identified before committing to a removal scope.
ERMI
🔋ERMI Floor Dust Sampling
ERMI provides a historical record of mold accumulation — not just what's airborne right now. Useful in Severance properties where symptoms are present but spore trap sampling comes back normal, or for verifying long-term post-remediation success.
HVAC
🏢HVAC Register & Return Air Testing
Testing directly at HVAC supply registers and return grilles identifies whether the air distribution system is distributing mold spores throughout the property. Elevated counts at registers compared to room-level samples confirm the AHU or ductwork as the amplification source — critical before any duct cleaning or coil remediation decision in your Severance building.
Clearance
📄Post-Remediation Clearance Testing
Post-remediation clearance testing for any Severance property — whether we did the remediation or another contractor did. Written clearance report from an independent accredited lab confirms the job is objectively complete.
Professional Mold Testing technician working in Severance, CO
How It Works

How Severance Mold Testing Works

Step 01
01
Select & Schedule
We help you choose the right test for your specific Severance, CO situation before booking. No default packages.
Step 02
02
On-Site Sampling
Calibrated equipment, correct AIHA methodology, outdoor baseline collected, COC maintained.
Step 03
03
Accredited Lab Analysis
Same-day lab shipment. Standard results 24–48 hours. Report compiled on receipt of lab data.
Step 04
04
Written Report Delivered
Written report with all lab data, COC documentation, and plain-language interpretation — ready for your use case.
24/7 Emergency Mold Testing experts in Severance, CO
Client Reviews

Mold Testing Reviews From Severance, CO

★★★★★
Needed post-remediation clearance testing after a contractor completed mold removal in our Severance home. Cheap Mold Removal used the same accredited lab protocol as the pre-remediation baseline test, making the comparison direct and meaningful. Written clearance report in hand within three days. Insurance accepted it without any additional documentation request.
Thomas B.
Severance homebuyer
★★★★★
Our office building in Severance, CO had occupant health complaints. Standard spore trap testing came back slightly elevated but not definitively actionable. Cheap Mold Removal recommended HVAC register-versus-room comparative testing — found dramatically elevated counts at two supply registers compared to the rooms they served. Confirmed AHU contamination. That targeted approach was exactly what our facilities team needed to justify the HVAC remediation budget.
Linda A.
Property manager, Severance, CO
★★★★★
Our pediatrician recommended professional mold testing after our youngest developed unexplained respiratory symptoms. Cheap Mold Removal's air sampling found elevated Aspergillus fumigatus in two bedrooms. Written report shared with the physician directly shaped the treatment approach. The mold source was identified and remediated — symptoms resolved within a month.
Rachel M.
Severance homeowner
Frequently Asked Questions

What Severance Clients Ask About Air Quality Testing

Spore trap (non-viable) testing collects all airborne particles and identifies them by genus under microscopy — results in 24–48 hours, genus-level data. Viable culture plates capture only live, culturable spores and grow them on culture media for species-level identification — results in 5–7 business days. For most routine Severance, CO air quality screening, spore trap sampling provides sufficient data faster. Viable culture is used when species-level confirmation matters — Stachybotrys investigation, occupational health documentation, or situations where genus data doesn't answer the specific question at hand.
Consumer settle-plate kits are designed to grow whatever lands on them over a set period — almost any indoor environment will produce growth, making a positive result nearly meaningless for decision-making. They don't measure spore concentrations, don't compare to outdoor baseline, and can't identify species. They're not accepted by insurance carriers, real estate attorneys, or industrial hygienists in Severance, CO. Professional AIHA-method sampling with accredited lab analysis is the only methodology that produces actionable, defensible data.
Minimum two indoor plus one outdoor comparative. Additional samples per floor, zone, or HVAC register depending on the scope of the question. We tell you specifically how many are warranted for your Severance property before booking.
Non-viable spore trap results from our accredited lab partner typically return in 24–48 hours from the date of sample receipt. We ship samples same-day in most cases, so most Severance clients receive their written report within 3–5 business days of the testing appointment. Viable culture takes 5–7 business days. ERMI takes 5–10 business days. Rush processing is available from some labs for time-sensitive situations — we can advise on availability.
Testing data is one input into the remediation decision. Significantly elevated indoor counts above outdoor baseline, presence of high-concern genera, and visible growth are the primary factors. We provide written interpretation and specific recommendations with every Severance, CO test report — you have the data and our analysis to make an informed decision.

Mold Testing Coverage — Severance & Throughout Severance, CO

Professional air quality testing and mold sampling throughout Severance, CO — including Severance and surrounding communities. Accredited lab analysis, written reports, same-day or next-day scheduling.

Zip codes served: 80546 80550 80615 80610

Call +1-844-578-1604 — Free Estimate

Schedule Mold Testing in Severance — Written Report Included

Calibrated sampling, accredited lab, written report. Call +1-844-578-1604 to schedule your Severance test.

📞 Call +1-844-578-1604

Our Services in Severance, CO

🟢 Techs On Duty in Severance, CO Call +1-844-578-1604